About the CRF250L

  • Introduction
  • Concept
  • Styling
  • Engine
  • Chassis
  • Comfort
  • Technical Specifications
  • Photo Gallery

Technical Specifications

Model name CRF250L (European model)
Model type Honda MD38
Dimensions (L x W x H) (mm) 2,195 x 815 x 1,195
Wheelbase (mm) 1,445
Ground clearance (mm) 255
Seat height (mm) 875
Curb weightRiding capacity (kg) 144
Riding capacity (No.of occupants) 2
Minimum turning radius (m) 2.3
Engine liquid-cooled 4-stroke DOHC single cylinder
Displacement (cc) 250
Bore x Stroke (mm) 76.0 x 55.0
Compression ratio 10.7
Fuel supply system Programmed fuel injection system (PGM-FI)
Starter Self-starter
Ignition Full-transistor battery ignition
Lubricating Wet sump
Fuel tank capacity (L) 7.7
Clutch Wet multiplate with coil springs
Transmission Constant mesh 6-speed return
Transmission gear ratio 1st 3.333
2nd 2.117
3rd 1.571
4th 1.304
5th 1.115
6th 0.962
Reduction gear ratio (primary/secondary) 2.807/2.857
Caster angle/Trail (degree/mm) 27.6°/113
Tire size Front 3.00-21 51P
Rear 120/80-18 62P
Brakes Front Hydraulic disk
Rear Hydraulic disk
Suspension Front Telescopic (Inverted)
Rear Swing arm (Pro-link suspension system)
Frame Semi-double cradle

* Manufacturer /Thai Honda Manufacturing Co., Ltd/ Thailand

Page Top

Honda Worldwide site

Home | Site Map | Site Index | About this Site

Copyright, Honda Motor Co., Ltd. and its subsidiaries and affiliates. All Rights Reserved.