TOKYO, Japan, September 25, 2012 - Honda Motor Co., Ltd. announced it will begin sales of a new model for its household MCHP (Micro Combined Heat and Power) gas engine cogeneration unit in November 2012, through gas utilities across Japan. Building on its well-received predecessors that have served as the core unit in the ECOWILL household cogeneration system*1,which runs by burning natural gas or LPG (liquefied propane gas) for electricity generation and using the exhaust heat for hot water supply and heating, the new model has an autonomous operation function that enables system use in a power outage or other emergencies.
In the aftermath of the 2011 Great East Japan Earthquake, a market need has arisen for a cogeneration system that can be used even during a power outage. The new household gas engine cogeneration unit MCHP1.0R with an autonomous operation function was accordingly developed based on a power generation unit that underwent a full model change in 2011. The new model is the power generation unit of ECOWILL PLUS, a new gas engine cogeneration system for electricity generation, hot water supply, and heating, which will be put on sale through gas utilities. Power can be generated independent of the utility grid by simply pulling the unit's starter grip to start the engine. Maximum power output during autonomous operation is approximately 980 W, which is supplied through a dedicated outlet to provide night lighting and to enable operation of a television and a personal computer for gathering information. Hot water for a bath and a floor heating system can also be available during an outage.
In 2003, Honda began sales of its first compact household cogeneration unit, which combined a gas engine with Honda’s original sine-wave inverter power generation technology. The unit underwent a full model change in 2011 as MCHP1.0K2, featuring Honda’s EXlink (Extended Expansion Linkage Engine)*2, featuring an expansion stroke longer than its intake stroke, resulting in a high expansion ratio for greatly increased thermal and fuel efficiency. With EXlink and Honda’s original power generation technologies, MCHP1.0K2 achieves power generation efficiency of 26.3%*3. In addition, thanks to its highly-efficient heat circulation system that thoroughly recovers the heat generated by the engine, MCHP1.0K2 achieves combined power and heat generation efficiency of 92.0%*4. Under the brand name ECOWILL, cogeneration systems composed of the Honda cogeneration unit and a water heater that uses exhaust heat have been sold by gas utilities across Japan and installed in approximately 120,000 households*5.
Along with Honda’s distinctive generator technologies, gas-powered household cogeneration units and solar power generation systems using thin-film solar panels are among the featured products in Honda’s home power generation business, which supports ecological household energy production and consumption to help realize low-carbon society of the future.
|(1)||Disconnect the electric plug from the regular hot water supply unit, and then connect it to the specially designed hot water supply unit for autonomous operation (on the left side).|
|(2)||Change the selector switch for power generation mode to “Outage (autonomous)” on the power generation unit.|
|(3)||Pull the built-in starter grip of the power generation unit to start. After the power generation unit has started, wait for at least 1 minute before using the system.|
During autonomous operation, the heat from the engine can be used in the following three ways for continuous operation:
|(1)||Storing hot water in the supply unit|
|(2)||Automatic operation of the bathroom dry heater|
|(3)||Automatic hot water filling of the bathtub|
|Engine type:||4-stroke liquid-cooled single-cylinder OHV|
|Displacement:||Intake stroke volume: 110 cm3
Exhaust stroke volume: 163 cm3
|Electricity generation type:||Multipolar sine-wave inverter power generation|
|Output form:||Normal operation: Single-phase three-wire system, 200 V
During power outage: Single-phase two-wire system, 100 V
|Electrical output:||Normal operation: 1.0 kW (Rated output)
During power outage: Maximum of 0.98 kVA
|Hookup:||Normal operation: Grid connection
During power outage: Dedicated outlet for autonomous operation
|Starting method:||Normal operation: Starter generator (automatic start with power from utility grid)
During power outage: Recoil starter (manually operated)
|Weight (installed):||76 kg (including oil)|
|Dimensions:||Height 750 mm x width 580 mm x depth 298 mm
(protruding parts excluded)