Honda-The Power of Dreams
Honda Introduces the All-New BF90 and BF75 4-Stroke Marine Outboard Engines

TOKYO, Japan, September 13, 2006 – Honda Motor Co., Ltd. introduced the all-new BF90 and BF75 medium-sized1 4-stroke marine outboard engines. The two new models will go on sale through Honda’s outboard dealers in Japan on November 1, 2006.

 

Ultra-Low Emission logo

BF90 4-stroke marine outboard engine
 


The new BF90 and BF75 achieve outstanding clean exhaust performance that exceeds US California Air Resources Board (CARB) emissions regulations for 2008 – the most stringent emissions standards in the world – while delivering superb performance, fuel efficiency and reliability. They are also the lightest, most compact models in their output category2 (90 to 100 PS).

Developed on the base of the 1.5-liter engine of the Honda Fit automobile, the new engines feature Honda’s PGM-FI programmed fuel injection system and lean-burn combustion, and VTEC3. They also boast the world’s first ignition timing governed by BLAST4 (Boosted Low Speed Torque) air/fuel ratio technology and other advanced electronic control devices. Together with a lightweight, compact design, these technologies combine to offer outstanding performance and fuel efficiency. Maximum speed and acceleration performance are improved, while fuel consumption is reduced by more than 20%5 compared to the previous BF90 model6. Battery charging capacity has been more than doubled to a class-leading 35 amperes.
1 25 to 100 PS
2 90 PS/75 PS (Honda calculations)
3 Variable Valve Timing and Lift, Electronic Control (featured only on the BF90).
4 Ignition timing is governed by air/fuel ratio at constant speed and during acceleration for improved acceleration.
5 In EPA-emission mode (Honda calculations)
6 Honda calculations


Honda has already taken steps to ensure that all 19 models in its marine outboard engine lineup, from the BF2 (2 PS) to the BF225 (225 PS), deliver emission performance complying with CARB 2008 regulations, making Honda the world’s first outboard engine manufacturer to make its entire lineup CARB 2008 compatible7. As a symbol of their clean operation, all outboard engines for sale in Japan display an “Ultra-Low Emissions” logo to identify them as the world’s leading environment-friendly engines.
7 As of 2003


BF90/BF75 Main Features
Lightweight and Compact
 
· The integral head and exhaust manifold construction, lightweight and compact generator with neodymium magnet rotor, and integral oil pan and crankcase design combine for a 6kg weight reduction and 10% size reduction compared to the previous model.

Fuel Economy
 
· Lean-burn operation is achieved through the use of Honda PGM-FI(Honda Programmed Fuel Injection) and an O2 feedback sensor. The implementation of intake/exhaust roller-type rocker arms and an offset cylinder layout help reduce internal friction, resulting in over 20% higher fuel efficiency compared to the previous model (EPA emissions-mode fuel consumption).

Operational Performance
 
· The BF90 and BF75 are the world’s first marine outboard engines to feature ignition timing governed by air/fuel ratio technology. Acceleration at all engine speeds is significantly improved through optimized, computer-controlled ignition timing based on air/fuel ratio.
· A separate two-way cooling system, new aerodynamically designed gear case, VTEC technology* and knock control* help achieve the highest maximum speed in the category yet with a smaller engine capacity. The new gear case is designed with a reduced frontal surface to reduce hydrodynamic drag. A large-sized splash plate helps reduce water splash while a longer anti-ventilation plate helps reduce cavitation around the propeller. To promote the use of the BF90/BF75 engines on a wider variety of boats, a 2.33-to-1 gear ratio has been selected. This allows for a choice of larger screws, helping achieve higher speeds and reduced splash.
 
* Featured on the BF90 only

Environmental Performance
 
· In addition to exhaust emissions levels that are significantly lower than those required by both the U.S. Environmental Protection Agency (EPA) for 2006 and domestic Japanese voluntary regulations, both BF90 and BF75 also exceed the 2008 CARB standards – the most stringent standards in the world.
· Both models are 95% recyclable (Honda calculations).

Durability and Reliability
 
· Oil pressure alert, overheat alert, over-rev limiter, PGM-FIwarning, ACG warning,water-in-fuel warning and other alert functions ensure instant recognition of any potential malfunction or abnormal operation.

Battery Charging Capacity
 
· Lightweight, compact generator boasts a category-leading net battery charging capacity of 35 amperes.

Easy to Install and Maintain
 
· The BF90/BF75 can be mated to a wider range of boat types than conventional models due to their light-weight, compact design.
· A flush valve joint makes for easy engine cleaning after use.
· A two-piece undercover promotes easier maintenance.

Design
 
· Like Honda’s larger marine outboard engines, the BF90/BF75 feature a striking “wing form” design for strength and streamlining.

Specifications
 
Model BF90D BF75D
Dimensions
(L×W×H in mm)
746 × 449 × 1,566 (LRTN)
Transom Height (mm) L: 537  X: 664
Engine 4-stroke in-line 4 cylinder
Displacement (cm3) 1,496
Bore × Stroke (mm) 73.0 × 89.4
Compression Ratio 9.7
Valve train 4-valve SOHC VTEC 4-valve SOHC
Max. Power [kW (PS)/rpm] 66.2 (90)/5,800 55.2 (75)/5,500
Max. Torque [N·m (kgf·m)] 123 (12.5) 118 (12.0)
Idling Speed (rpm) 750 ± 50
Fuel Unleaded Gasoline
Lubrication System Force feed
Cooling System Liquid cooled (thermostat-equipped)
Ignition System Fully transistorized battery ignition
Starter System Electric
Exhaust System Under water (propeller boss exhaust)
Charging Capacity 12V-35A
Fuel Con. Max. Output
(g/kWh)
350 340
Dry Weight
(kg, w/propeller)
166 165