• Introduction
  • Concept
  • Styling
  • Power Unit 'eSP'
  • Frame/Chassis
  • Technical Specifications

Technical Specifications

Model name SH125i (European Model)
Dimensions (L x W x H) (m) 2.030 x 0.740 x 1.150
Wheelbase (m) 1.340
Ground clearance (m) 0.145
Seat height (m) 0.799
Curb weight (kg) 134 (F: 51; R: 83), *135 (F: 52; R: 83)
Engine type Liquid-cooled 4-stroke SOHC single
Displacement (cm3) 125
Bore x Stroke (mm) 52.4 x 57.9
Compression ratio 11:1
Maximum output 8.7kW/8,500min-1 (95/1/EC)
Maximum torque 11Nm/6,500min-1 (95/1/EC)
Fuel consumption 45.5km/l (128.5mpg, without Idling Stop, WMTC mode** / 47.4km/l, 133.9mpg, with Idling Stop, WMTC mode**)
Fuel supply system PGM-FI electronic fuel injection
Starter Electric
Ignition Digital transistorised with electronic advance
Fuel tank capacity 7.5liters
Clutch Automatic; centrifugal
Transmission V-Matic
Transmission gear ratio 2.68 - 0.82
Final Drive V-belt
Caster angle/Trail 26°/85mm
Tire size Front 100/80-16 (50P)
Rear 120/80-16 (60P)
Brakes Front 240mm x 4mm disk, three piston calliper (CBS) / two piston calliper (ABS)
Rear 240mm x 5mm disk, single piston caliper
Suspension Front 33mm telescopic fork, 89mm axle travel
Rear Dual-damper unit swingarm, 83mm axle travel
Frame Underbone; steel tube
ABS version
Please note that the figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional eq

Page Top

Honda Worldwide site

Home | Site Map | Site Index | About this Site

Copyright, Honda Motor Co., Ltd. and its subsidiaries and affiliates. All Rights Reserved.