MODEL	RS250R
TYPE	MR02
LENGTH × WIDTH × HEIGHT	1954×640×1090mm
WHEELBASE	1340mm
GROUND CLEARANCE	110mm
SEAT HEIGHT	785mm
CASTERANGLE	22° 30'
WEIGHT (SEMI DRY)	101kg
ENGINE TYPE	LIQUID-COOLED 2-STROKE CRANKCASE REED VALVE 75° V-TWIN
DISPLACEMENT	249cm3
BORE AND STROKE	54×54.5mm
MAX. POWER OUTPUT	67.7kw/12500rpm
	92PS/12500rpm (UNLEADED HIGH-OCTANE FUEL)
MAX. TORQUE	52.3N•m/12000rpm
	5.33kgf-m/12000rpm (UNLEADED HIGH-OCTANE FUEL)
CARBURETOR	KEIHIN PJ38 THROTTLE SENSOR-EQUIPPED POWER JET CONTROLCARBURETOR × 2
IGNITION	DIGITAL CDI
TRANSMISSION	6-SPEED
CLUTCH	DRY MULTIPLATE
FUEL TANK CAPACITY	21 LITERS
ENGINE OIL CAPACITY	0.5 LITERS
FRAME TYPE	ALUMINUM TWIN-SPAR
BRAKE	296mm DUAL FLOATING DISK WITH 4-PISTON CALIPER
	198mm single disk with single piston caliper
WHEEL	3.50-17 6-SPOKE 'U' SECTION CAST MAGNESIUM
	5.50-17 8-SPOKE 'U' SECTION CAST MAGNESIUM
SUSPENSION	FULLY ADJUSTABLE 41mm INVERTED TELESCOPIC FORK
	REMOTE RESERVOIR DAMPER

DESCRIPTION	QTY.
ONER'S MANUAL/PARTS LIST	1
CARBURETOR SETTING KIT	1
BAFFLE SPONGE (FOR FUEL TANK FILLER)	6
POWER JET ADJUSTMENT COUPLER	2
BATTERY SUB-HARNESS	1
MAIN STAND	1
STEP STAND	1
SEAL GAP	1
CHAIN CASE RUBBER	2
RUBBER SEAT PAD	1
RUBBER SEAT BACK PAD	1

DESCRIPTION	QTY.
LEFT COVER GASKET	2
CYLINDER	2
CYLINDER GASKET (0.4T)	6
CYLINDER GASKET (0.5T)	14
CYLINDER GASKET (0.6T)	6
CYLINDER HEAD	2
O-RING (60×1.9)	10
CRANKSHAFT	1
PISTON	10
PISTON WRIST PIN	10
PISTON PIN CLIP (15mm)	40
PISTON RING	10
REED VALVE A	12
REED VALVE B	12
REED VALVE GASKET	10
EXHAUST JOINT GASKET	2
EXHAUST PIPE SEAL	2
WATER PUMP BODY GASKET	1
WATER PUMP COVER GASKET	1
CLUTCH FRICTION DISK A	4
CLUTCH FRICTION DISK B	2
CLUTCH PLATE	5
DRIVE SPROCKET (15t)	1
DRIVE SPROCKET (17t)	1
SPARK PLUG (R6120-10.5)	4
CONNECTING ROD SMALL-END BEARING	10
CRANKSHAFT OIL SEAL (34×62×6mm)	1
CRANKSHAFT OIL SEAL (25×38×8mm)	1
CRANKSHAFT OIL SEAL (34×50×7mm)	1
COUNTERSHAFT D-RING (23.75mm)	1
CYLINDER O-RING (85.3×2mm)	6
CYLINDER STUD BOLT (6×28mm)	14
CYLINDER DOWEL PIN (6×10mm)	2
CRANKSHAFT SNAP RING (62mm)	1
EXHAUST PIPE SPRING	2
NOISE SUPPRESSOR CAP	2
FINAL DRIVEN SPROCKET (34t)	1
FINAL DRIVEN SPROCKET (35t)	1
FINAL DRIVEN SPROCKET (37t)	1
FINAL DRIVEN SPROCKET (38t)	1
REAR BRAKE PAD	2
FRONT BRAKE PAD	8
WING MARK (STICKER)	R/1 L/1